中文版   English  
 
News Center
 · Strengthen the three dialectic
 · Let mobile compressor run fast
 · Polyurethane insulation cotton
 · Air to water heater industry -
 · Vacuum drying box using the pr
 · Heat pump quality guarantee "c
 · Air compressor motor protectio
 · Water pump
Contact Us
  • Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province
    Contact Person:Mr Yan
    E-Mail:zhihe998@126.com
    Tel:+86-0769-86723636
    Fax:+86-0769-81080026
    Mobile:13829228807  
               13829282260
    QQ:2463307187    
    WebSite: www.dg-zhihe.cn

 
News Center Location: Home > News
 

Air causes temperature exceed the standard and control method to deal with the press
Author: 志和      Release Date:2014/6/11      View Count:2536
 

Summer, always easy to air compressor high-temperature failure problems, thisfactory air compressor temperature, tomorrow the enterprise air compressor oil heat drop down, it can run bad is bad music short press maintenance ofdealers. But the air compressor perennial in high temperature is easy to make the compressor into a dangerous state. The correct control air compressor oiltemperature can reduce the probability of high temperature air compressor.Here small make up remind you, is a great tool for air compressor cooling ofair compressor water heater Oh, but also the way to bring the benefits of hot water, is too good project. (waste heat of air compressor water heater by recycling air compressor operation produces hot water, can not only forcooling, air compressor can also produce hot water for employees to take a shower or heating)

In daily operation, after statistics found that, in the production of air compressor oil in general between 80 ° C ~ 90 ℃, and according to the operation principle of air compressor oil, when oil pressure oil in the airis less than 40 ℃ or above 90 ℃, the oil will change. Air compressor oil temperature is too low (temperature less than 40 degrees), oil viscosity is too large, mechanical friction is blocked, but even more dangerous is easy toproduce a large number of carbon deposition, a large number of carbon deposition production equipment, will make the combustion or explosion under high temperature; air compressor oil temperature oil temperature too high(greater than 90 degrees), oily easily oxidized, reduced viscosity or deterioration, lubricating effect, shorten equipment life. Therefore, in order to reduce the rate of air compressor failure, must to air compressor at temperatures between 80 ° C to 90 ℃.

Through the above discussion, we know that good control of air compressoroil, can greatly reduce the air compressor failures and accidents, to the development of enterprises and production safety is very important. Then forwhat good method to control the air compressor oil? Below is a small make up for you to sort out of the control of air compressor oil temperature due toexceed the standard approach. Hope to help your air compressor. The following content, if wrong, please correct!

Cause pressure engine oil temperature exceed the standard empty? (the oil temperature too low or too high cause)?

Causes of air compressor oil temperature too low: air compressor oiltemperature below 22  in the stationary state. In fact, causes the oil temperature too low is not much, mainly is the temperature is too low or theair compressor oil lubricating oil viscosity is too high, open the equipmentitself less units, outlet pressure is low, the air compressor oil can not be fully utilized.

The reason of high temperature air compressor: there are many factors lead tohigh temperature, especially in the summer time, the main factors are: the temperature is too high; the higher temperature of circulating cooling wateror a cooler jam; outlet pressure is too high.

The temperature of air compressor to control (control method of air compressor oil temperature is too high or too low):

The control method of the oil temperature too low or too low temperature:temperature unchanged for a long time, it is easy to increase the frictiondrive parts, sometimes screaming, so that equipment can not get sufficient lubrication, causing damage to the equipment. The oil temperature is too low,mainly occurs in the winter, the methods mainly have the following several kinds: strengthening the building of sealing and heating and heat preservation, and the control of the circulating water flow is 1 / 3 of the original, so that the cooling effect of the oil cooler is reduced, the temperature; keep 1 ~ 2 air compressors continuous operation for more than 3 days. Through the mechanical friction so that the oil temperature rises naturally.

Control method of high temperature, the compressor to run high oil temperature, oil quality variation, air compressor oil less lubricating effect, this will increase the wear of equipment. Method for reducing air compressor oil temperature are the following: the summer air temperature is high, the oil temperature in 5O , sometimes more than the standard limit 6O. The control way is open sunroof, doors and windows for ventilation plant;in high temperature weather, time scouring plant ground with the cooling water cooling; summer circulation cooling water temperature does not fall high, so that the oil cooler effect, the temperature. Therefore, should take timely measures to cool down, reduce the temperature of circulating water; if found within the oil window of oil color thin, pale, shall timely check the oil quality. If the oil viscosity reduction should be<, SPAN class=Apple-converted-space> <, /SPAN>the new oil or added some new timely replacement of oil, usually in 3-6 months, it should bereplaced with new oil. The oil cooler; keep unimpeded, should periodically check the cooler effect. One of the reasons is usually plugged oil cooler andoil temperature rise, so that the timely liquidation of oil cooler is blocked, in order to ensure the normal operation of the cooling effect and the equipment of oil cooler; in the choice of lubricating oil, lubricating oil should choose good quality, in order to ensure the oil and reduce the carbon deposition and the air compressor is easy in fault state; the oiltemperature long term than 5O ℃, and circulating cooling water can not bethe temperature drop down, should be in the human circulating cooling water in a proportion of fresh water, in order to reduce the temperature of the cooling water or oil temperature. If access to fresh water still can notreduce the oil temperature, fresh water can be directly by cooler system, but this time should not be too long, generally about 1-5 days is appropriate.

Reminder.

Chronicles and the electromechanical device limited company to recommend air compressor, water heater, air compressor heat recovery equipment, as long as you have the air compressor factory, can 0 operation cost of producing hot water and heating.

See details > >

(this paper mainly analyses the causes and control of air compressor oil temperature exceed the standard way to deal with, but in actual in the problem solving process is for reference only.)

 
专业提供:空压机热水器空压机余热回收空压机余热利用空气能热水器系列
Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province Tel:+86-0769-86723636 Fax:+86-0769-82820762
All rights reserved © DongGuan ZhiHe Mechanical and electrical equipment Co., LTD   
网站地图    sitemaps