中文版   English  
 
News Center
 · Strengthen the three dialectic
 · Let mobile compressor run fast
 · Polyurethane insulation cotton
 · Air to water heater industry -
 · Vacuum drying box using the pr
 · Heat pump quality guarantee "c
 · Air compressor motor protectio
 · Water pump
Contact Us
  • Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province
    Contact Person:Mr Yan
    E-Mail:zhihe998@126.com
    Tel:+86-0769-86723636
    Fax:+86-0769-81080026
    Mobile:13829228807  
               13829282260
    QQ:2463307187    
    WebSite: www.dg-zhihe.cn

 
News Center Location: Home > News
 

Oiling maintenance skills
Author: 志和      Release Date:2014/4/26      View Count:1816
 

The oiler should regularly clean kerosene cleaning, remove impurities and dirt inside the injector and fuel tank, for every oiler continuous working condition should be cleaned once a month.

The speed reducer should start first for fuel, lubricating oil in the gear device, the general should be cleaned once a month to replace, and the oiler if not, should beadjusted to zero or oil unloading antirust oil seal.

The working medium the oiler, the kinematic viscosity at 50 ℃ for 7~40CST oil,impurity particles containing medium should not 0.025mm.

The oil level in the tank of oil and reduction should be timely refueling. Oil tank oil level is lower than the bottom can not be lower than the cam, cam bottom shall betimely refueling. Otherwise it will affect the oiler, camshaft service life.

The oil filling quantity, can be used to adjust the adjusting sleeve, counterclockwise rotation adjusting nut oil. Clockwise rotation is oil filling quantity reduction, minimumcan be reduced to zero, after adjustment should be a lock nut.

 to filling the tank, should be through the oil filter oil filler in the network.

The treated oil cover do not arbitrarily disassembled, so as to avoid the leakage effect of oil absorption.

The drop of oil is not oil, can be taken out of the pump body apart with clean kerosenecleaning, maintenance pump check valve check valve and check the circuit has no leakage.

Export is not out of oil, can check the oil valve check valve and with the surface of the seal, and check the circuit has no leakage, or the plunger and the plunger sleeve ifwear gap increases will also cause the oil pressure is reduced or no oil.

The oil pipe is connected with the host of lubricating points, should be added to the highest level of lubricating oil tank, oil pump to the maximum amount of oil position,first start injector or a rocking handle, or by pressing the handle, to be drip tubing oildrops continuously, the lubricating oil pipeline is full, can be connected to the hostoiling start work.

Reminder.

Chronicles and the electromechanical device limited company to recommend air compressor, water heater, air compressor heat recovery equipment, as long as youhave the air compressor factory, can 0 operation cost of producing hot water andheating.

See details > >

(this paper mainly analyzes the oiling maintenance skills, but in actual in the problem solving process is for reference only.)

 
专业提供:空压机热水器空压机余热回收空压机余热利用空气能热水器系列
Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province Tel:+86-0769-86723636 Fax:+86-0769-82820762
All rights reserved © DongGuan ZhiHe Mechanical and electrical equipment Co., LTD   
网站地图    sitemaps