中文版   English  
 
News Center
 · Strengthen the three dialectic
 · Let mobile compressor run fast
 · Polyurethane insulation cotton
 · Air to water heater industry -
 · Vacuum drying box using the pr
 · Heat pump quality guarantee "c
 · Air compressor motor protectio
 · Water pump
Contact Us
  • Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province
    Contact Person:Mr Yan
    E-Mail:zhihe998@126.com
    Tel:+86-0769-86723636
    Fax:+86-0769-81080026
    Mobile:13829228807  
               13829282260
    QQ:2463307187    
    WebSite: www.dg-zhihe.cn

 
News Center Location: Home > News
 

Why the air compressor head will get stuck
Author: 志和      Release Date:2014/4/11      View Count:2949
 

Screw machine performance and reliability 80% depending on the head. The head is divided into two categories: public and private version of die head. The public version of the head refers to the head professional machine manufacturer. Personal Editionhead refers to the head air compressor factory production, their use. The nose of the air compressor malfunction card dead, it must first be motor and head off, separaterotating head to confirm whether have been card dead (normal head can be rotatedby hand), the fault for the serious fault, recommends that users do not disassemble,can be timely and technology center to determine the repair plan.

The air compressor head stuck for several reasons:

1, the quality issues: due to delay in oil, oily bad, mixed with oil or oil too dirty and other causes of poor head cooling, lubricant and carbon make rotor and casing are sintered together, often occur in the rotor and casing or the exhaust end rotor outer circle and the casing in hole. So choose air compressor oil lubricating oil replacementkey; occurs more easily in use inferior lubricating oil or extended use nose stuckaccident.

2, reverse blocking: reversal, the compressed air to the exhaust end of the rotorthrust will cause the metal to metal contact, sintering and choked to death, so in general only in protection failure, or replace the motor wiring, replacing switch etc..

3, the entry of foreign matter stuck: foreign bodies from the suction inlet, resulting inthe death card. Air compressor parts

4, the inlet end gap bad card dead: with the naked eye can see the air inlet endwhether the sintering phenomenon, make the exhaust end bearing excessive wear ofthe fault location, inlet axial displacement caused by the air inlet end of the gap is too small, common to the self repair, improper positioning nut locking torque.

5, the machine running oil supply shortage, the oil level is too low will cause bearingrotor compressor loss of lubrication in the running process, resulting in bearing severe wear make positive and negative (yin and Yang) screw friction card dead,including oil change or add is not timely, or oil plug, leakage, can also lead to the lack of oil card dead;

Small make up remind you: professional maintenance of screw air compressor is helpful to prolong the service life of the air compressor, air compressor maintenanceis an important expenditure, so please professional air compressor of the operator.

Reminder.

Chronicles and the electromechanical device limited company to recommend air compressor, water heater, air compressor heat recovery equipment, as long as youhave the air compressor factory, can 0 operation cost of producing hot water andheating.

See details > >

(this paper analyzes why the air compressor head will Kaka died, but in actual in the problem solving process is for reference only.)

 
专业提供:空压机热水器空压机余热回收空压机余热利用空气能热水器系列
Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province Tel:+86-0769-86723636 Fax:+86-0769-82820762
All rights reserved © DongGuan ZhiHe Mechanical and electrical equipment Co., LTD   
网站地图    sitemaps