中文版   English  
 
News Center
 · Strengthen the three dialectic
 · Let mobile compressor run fast
 · Polyurethane insulation cotton
 · Air to water heater industry -
 · Vacuum drying box using the pr
 · Heat pump quality guarantee "c
 · Air compressor motor protectio
 · Water pump
Contact Us
  • Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province
    Contact Person:Mr Yan
    E-Mail:zhihe998@126.com
    Tel:+86-0769-86723636
    Fax:+86-0769-81080026
    Mobile:13829228807  
               13829282260
    QQ:2463307187    
    WebSite: www.dg-zhihe.cn

 
News Center Location: Home > News
 

Repair and maintenance of the conventional screw type air compressor fittings oil
Author: 志和      Release Date:2014/3/25      View Count:1916
 

Screw type air compressor fittings oil maintenance:

Have a decisive impact on the performance of screw oil quality of the injection screwmachine, good oxidation stability, oil has good separation rapid, bubble good, high viscosity, good corrosion resistance, therefore, the user must use the pure the special screw oil company.

Replace the screw type air compressor fittings oil:

The new machine screw machine running in period 21 days after the first oil change,after every run 3 months or so days the replacement of the new oil. Oil change at best and replacement of oil filter. Used to shorten the replacement cycle in the harsh environment of the place.

Screw type air compressor fittings oil replacement method:

Starting air compressor to run for 5 minutes, the temperature of the oil to 50 , the viscosity of the oil drop. Stop running, when the oil gas barrel with a 0.1Mpa memorypressure, open the drain valve at the bottom of the oil and gas tank, the tank. Oil drain valve should be opened slowly, so as not to pressure with temperature of lubricating oil and dirt. Lubricant drops off after discharging oil valve. Unscrew the oil filter, the oil pipeline in the dump, a new oil filter change. Open the oil filler screw plug,add new oil, the oil level in the oil standard scale line range, tighten the oil filler screw plug, check whether there is leakage phenomenon. The lubricating oil must be inspected regularly in the use process, found that the oil level line is too low to beadded to new oil, lube oil in use must also often the discharge of condensed water,general pump weekly, should discharge a 2-3 days under high temperature. Shut down for more than 4 hours, no pressure in the oil and gas tank cases open the oil valve, discharge condensate water, see the quick closing valves oil outflow.

(of air compressor water heater technology teacher to remind you: the replacement ofthe oil and gas separator, pay attention to the static release, metal mesh and thedrum shell connected, prevent the build-up of static electricity caused the explosion.Also should prevent dirty object into the oil tank, so as not to affect the operation of the compressor)

Letter of recommendation:

Chronicles and the electromechanical device limited company to recommend air compressor, water heater, air compressor heat recovery equipment, as long as youhave the air compressor factory, can 0 operation cost of producing hot water andheating. The scope of supply: China (excluding Hong Kong and Macao).

See details > >

(this paper mainly analyzes the screw type air compressor fittings oil regular repairand maintenance, but in actual in the problem solving process is for reference only.)

 
专业提供:空压机热水器空压机余热回收空压机余热利用空气能热水器系列
Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province Tel:+86-0769-86723636 Fax:+86-0769-82820762
All rights reserved © DongGuan ZhiHe Mechanical and electrical equipment Co., LTD   
网站地图    sitemaps