中文版   English  
 
News Center
 · Strengthen the three dialectic
 · Let mobile compressor run fast
 · Polyurethane insulation cotton
 · Air to water heater industry -
 · Vacuum drying box using the pr
 · Heat pump quality guarantee "c
 · Air compressor motor protectio
 · Water pump
Contact Us
  • Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province
    Contact Person:Mr Yan
    E-Mail:zhihe998@126.com
    Tel:+86-0769-86723636
    Fax:+86-0769-81080026
    Mobile:13829228807  
               13829282260
    QQ:2463307187    
    WebSite: www.dg-zhihe.cn

 
News Center Location: Home > News
 

Air compressor over temperature shutdown how to solve?
Author: 空压机热水器      Release Date:2014/2/21      View Count:2541
 

    We usually deal with over temperature shutdown is cooler and oil, this approach to the new machine, the effect is very obvious. But for more than two years old machine, but not cure. Often just clean up soon, and over temperature shutdown phenomenon. In this case, we always suspected cooler cleaning is not thorough.

    In fact, the cooler thorough cleaning is not just a reason, oil system machine has huge over temperature problems. The air compressor is now the majority of the semi synthetic oil and mineral oil or mineral oil based, life in general between 2000-4000 hours. This oil is generally run about two years will appear coking, even the normal oil will also appear this phenomenon, because every time the oil can not put heavy oil 100% emission clean. Heavy oil deposits in the gear box oil point remains, follow the new oil together again in the oil circulation. Running a certain period of time will cause the oil deterioration, coking phenomenon. Will emit green or blue emission fluid in discharge air compressor export. You will be oil viscosity greatly, and asphalt shaped lump discharge. Continue running will appear machine cold start difficulties, motor often overload. The most serious when can appear even the host can not rotate, the causes of false lock phenomena.

    The original deal with this situation, the general is the host. Soaked in cleaning agent dedicated, then the oil tank, oil cooler and the main element soak cleaning. The process is complex, time-consuming and laborious. But after soaking machine all seals must be replaced. Once the cleaning cost is very expensive. But now this need not so complicated, only oil coking test agent to detect oil samples, such as the determination of the oil coke. Just add lubricating oil quantity is 1/10 in lubricating oil wana sweep (transliteration) cleaning agent, the boot drive 40-60 hours, the lubricating oil drain. The interior of the machine will be thoroughly cleaned. Then add new oil can be normal operation. Time saving, low cost. And Saul cleaning agent and wana oil can not produce a chemical reaction, only coking dilution, so not to machine metals and non-metallic parts of any corrosion.

 
专业提供:空压机热水器空压机余热回收空压机余热利用空气能热水器系列
Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province Tel:+86-0769-86723636 Fax:+86-0769-82820762
All rights reserved © DongGuan ZhiHe Mechanical and electrical equipment Co., LTD   
网站地图    sitemaps