中文版   English  
 
News Center
 · Strengthen the three dialectic
 · Let mobile compressor run fast
 · Polyurethane insulation cotton
 · Air to water heater industry -
 · Vacuum drying box using the pr
 · Heat pump quality guarantee "c
 · Air compressor motor protectio
 · Water pump
Contact Us
  • Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province
    Contact Person:Mr Yan
    E-Mail:zhihe998@126.com
    Tel:+86-0769-86723636
    Fax:+86-0769-81080026
    Mobile:13829228807  
               13829282260
    QQ:2463307187    
    WebSite: www.dg-zhihe.cn

 
News Center Location: Home > News
 

Analysis of the main effects of screw air compressor oil.
Author: 空压机热水器      Release Date:2013/11/5      View Count:2584
 

Screw air compressor oil can help solve noise, cooling, lubrication, protection,flushing, unloading, sealing, damping and other issues, as follows:

One, the noise reduction effect

The sprayed oil is a viscous fluid, the absorption and damping effect on acoustic and acoustic wave, general injection after the noise can be reduced by 10 ~ 20 db.

Two, cooling effect

The oil was injected into the micro droplet, mixed with compressed gas, compressedheat surface rapidly absorbing gas change greatly, cooling the compressed medium,greatly reducing the exhaust temperature.

Three, lubrication

Injection screw air compressor, due to the existence of a large number of oil, andfemale rotor absorb only a small part of the total power consumption of compression,so that the synchronous gear saved, the male rotor direct drive female rotor. In addition, because the oil used to lubricate the sprayed oil with the bearings of exactly the same, so there is no need to use a set of complex sealing devices to gas and oilare separated, which makes the distance between rotor bearing can be smaller,significantly improve the stiffness of the rotor, reduce deformation.

Four, protective effect

Corrosion, dust, to a better protective effect on the screw compressor plays.

Five, flushing action

Clastic screw air compressor mainframe wear down in the work process can belubricating oil washing away, the good and bad degree of wear parts of greatinfluence, lubricating oil is formed on the friction surface is very thin, metal debrisretention will destroy the oil film on the friction surface, the formation of dry friction,caused by abrasive wear.

Six, unloading effect

Due to the oil film exists between friction surfaces, load on the friction surface is moreevenly through oil film distribution in the friction.

Seven, the sealing effect

A plurality of the leakage passage in the screw compressor, the leakage channels arenarrow gap, oil has greatly strengthened the sealing effect, so that the leakage oftheir greatly reduced.

Eight, damping effect

Friction parts in the oil film motion, as if floating in the "oil pillow", the vibration of the machine play a buffer action.

 
专业提供:空压机热水器空压机余热回收空压机余热利用空气能热水器系列
Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province Tel:+86-0769-86723636 Fax:+86-0769-82820762
All rights reserved © DongGuan ZhiHe Mechanical and electrical equipment Co., LTD   
网站地图    sitemaps