Recently often have friends consulting air-conditioning compressor does not turn the question, to solve this problem, Xiaobian specially consulted the chronicles and electromechanical Co., engineers and collected some information on the Internet, I hope to give you a satisfactory answer.
Many reasons for air conditioning compressor does not turn, but the master told us general the most common reason may be due to refrigerant loss caused, normally computer will automatically stop the compressor work, like this solution is very simple, only need to add a certain amount of refrigerant can be solved.
The following is the number of the air conditioning compressor Xiaobian collected not turn and solutions:
An AC contactor, air conditioning problems
Solution: to focus on the detection of the presence of open circuit or wiring error problem, right away.
Two, the air-conditioning indoor unit and outdoor unit connecting line circuit breaker to outdoor machine without power failure, caused by air conditioning compressor does not turn
Resolution: the replacement of the new line in time.
Improper use of three, air conditioning
Solution: air-conditioning setting temperature is lower or higher than the indoor temperature, the air conditioning compressor does not turn.
Four, the computer board can lead to damage to the air conditioning compressor does not turn
Solution: the timely repair or replacement.
Five, air conditioning start capacitor is damaged
Solution: air conditioning start capacitor is damaged, will cause the compressor motor can not run, caused by failure to the air conditioning compressor does not turn, fault this time change the capacitance or the panel to remove the air conditioning compressor does not turn.
Six, lack of fluoride in air conditioning air conditioning compressor does not turn
Solution: a timely manner to the fluoride air-conditioning.
If you don't find the reasons for the failure, so the air conditioning compressor not probably cause damage to the air conditioning compressor, the compressor is used to determine direct power alone / open pipeline system. |