中文版   English  
 
News Center
 · Strengthen the three dialectic
 · Let mobile compressor run fast
 · Polyurethane insulation cotton
 · Air to water heater industry -
 · Vacuum drying box using the pr
 · Heat pump quality guarantee "c
 · Air compressor motor protectio
 · Water pump
Contact Us
  • Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province
    Contact Person:Mr Yan
    E-Mail:zhihe998@126.com
    Tel:+86-0769-86723636
    Fax:+86-0769-81080026
    Mobile:13829228807  
               13829282260
    QQ:2463307187    
    WebSite: www.dg-zhihe.cn

 
News Center Location: Home > News
 

How to solve the air compressor oil leakage fault?
Author: www.dg-zhihe.com      Release Date:2012/11/5      View Count:5167
 

How to solve the air compressor oil leakage fault?

( supply: Chuzhou air compressor water heater, Chuzhou air compressor waste heat recovery )

Air compressor oil air compressor is in the process of using one of the most common fault, how to solve the air compressor oil leakage fault? The following companies and the air compressor fault to make detailed analysis and the solution.

The fault phenomenon: in the daily operation of air compressor, air compressor oil leakage often occurs, the appearance of a lubricating oil overflow.

Causes of leakage of air compressor:

In 1, the belt is mounted close to cause the spindle bearing abrasion.

2, combination of surface leakage into the return pipe joint loosening,.

In 3, the spindle loose lead to leakage of oil seal

In 4, oil seal oil seal leakage loss or defect.

5, cast or machined defects may also result in the phenomenon of oil leakage of air compressor.

Air compressor oil solution:

( supply: Chuzhou Huainan air compressor water heater, Chuzhou Huainan air compressor waste heat recovery )

1, check the oil, the box body and the size, does not conform to the standard to be replaced.

2, check the oil seal and the shaft joint has scratches and defects, scratching and defects should be replaced.

3, observe the seal parts, check the oil seal is cracked, inner lip with or without cracking or flanging. The circumstances should be replaced.

4, check back to the oil flow, oil return not free makes the crankcase to excess pressure seal leak or loss, must ensure that the oil return pipe of minimum diameter, and not twisted, not bending, oil return smoothly.

5, check and adjust the belt tightness degree, the thumb to press 10 millimeter advisable.

6, the combination of inspections gasket seal, repair or replace the gasket; inspection, oil return joint bolt and the screw and tighten.

In 7, need to check the body cast or machined defects, repair or replacement of defective pieces. 8, to move the spindle checkpoint neck to the clearance is too large, the gap is too large to be replaced at the same time bearing and oil seal.

In 8, and the mechanical and electrical equipment limited company sincere intention to recommend the air compressor water heater, air compressor waste heat recovery equipment, as long as you plant air compressor, can 0 operation cost system of water. Scope of supply: China (excluding Hong Kong and Macao ).

 
专业提供:空压机热水器空压机余热回收空压机余热利用空气能热水器系列
Address:Qinghu cun, Qishi Town, Dongguan, Guangdong Province Tel:+86-0769-86723636 Fax:+86-0769-82820762
All rights reserved © DongGuan ZhiHe Mechanical and electrical equipment Co., LTD   
网站地图    sitemaps